Skip to content
Warning

This documentation is in active development. Content is being updated as feedback is reviewed. Your patience is appreciated.

Submit documentation feedback with the widget at the bottom-left of this window or by emailing [email protected].

Open a support ticket with the widget at the bottom-right or by emailing [email protected].

Connection Problems

Can't Connect CNC machine to Computer

First steps:

  • Make sure your machine is turned on
  • If you're connecting with a cable, make sure it is plugged in securely on both ends
  • Close any other control software that might be communicating with your machine
  • Make sure you've selected the correct device in MillMage, and that the controller type and connection method are correct

If you still can't connect to the machine:

CNC machine Doesn't Stay Connected To Computer

If your CNC machine connects to the computer but doesn't stay connected, please try the following:

CNC Machine Behaves Unexpectedly

If your device is restarting when you try to use it, you are most likely experiencing either communication problems or brief losses of power. This is often visible when a device set to home on startup homes unexpectedly. Please try the following:

CNC machine Is Connected, But Not Responding

If your machine appears to be connected to the computer but is not responding, try the following:

For more help using MillMage, please visit our forum to talk with MillMage staff and users, or email support.