Skip to content
Warning

This documentation is in active development. Content is being updated as feedback is reviewed. Your patience is appreciated.

Submit documentation feedback with the widget at the bottom-left of this window or by emailing [email protected].

Open a support ticket with the widget at the bottom-right or by emailing [email protected].

Warning

Secure the material stock to the CNC machine by following the CNC manufacturer workholding guidelines.

FAILURE TO FOLLOW CNC MANUFACTURER WORKHOLDING RECOMMENDATIONS CAN LEAD TO DAMAGED PROPERTY, BODILY HARM, OR DEATH.

Verify that the material stock is properly secured by vigorously pushing and pulling against the workpiece in all directions.

View the Workholding Guide for examples.

Screw Workpiece Directly to Wasteboard

Predrill screw pilot holes in several places away from the machining area. Secure the workpiece with screws appropriate for the material stock.

Pros

  • Provides strong and stable fixation
  • Relatively simple and inexpensive
  • Only limit is workpiece area
  • Can reduce potential tooling collisions when countersunk into the workpiece
  • Hardware is readily available
  • Can use holes in design to hold down products of CNC operations
  • Can provide a repeatable X, Y, and Z Axis project origin point, minimizing losses due to broken bits and machined away zeroing points

Cons

  • Bits may break if screws are hit during CNC operations
  • Requires drilling into the material, which may not be suitable for all projects
  • Requires drilling into the wasteboard
  • Not ideal for delicate or fragile materials
  • Screw height must be accounted for when measuring the Safe Clearance Height, if the screws are above the material surface
Warning

Secure the material stock to the CNC machine by following the CNC manufacturer workholding guidelines.

FAILURE TO FOLLOW CNC MANUFACTURER WORKHOLDING RECOMMENDATIONS CAN LEAD TO DAMAGED PROPERTY, BODILY HARM, OR DEATH.

Verify that the material stock is properly secured by vigorously pushing and pulling against the workpiece in all directions.

View the Workholding Guide for examples.

Other Workholding Methods

Screw Workpiece Down

Predrill several pilot holes away from the machining area. Secure with screws appropriate for the material stock.

Clamp Workpiece

Use metal, wood, or plastic clamps to secure the stock from the top-down and/or sides.

Adhere With Double-sided Tape

Cover the flat base of the material stock with double-sided tape to adhere it to the CNC work area.

Adhere With Masking Tape and CA Glue

Cover both the flat base of the material stock and the CNC work area with tape and use CA glue to stick them together.

Jigs and Fixtures

Use custom-made jigs and fixtures to secure stock and for rapid cycle time when machining on multiple objects within the same operation.

Tack Down With Machineable Brads

Use machineable brads to secure the stock to the wasteboard, without risking tooling should collisions ever occur.

Use Vacuum Table

Hold down flat stock and release the material at a flip of a switch or automatically through MillMage.

Secure Workpiece in Vise

Securely mount a vise to the CNC work area and use the vise jaws to hold the material stock.

Workholding Optimizations

Workholding When Cutting Through Workpiece

Add custom tabs to keep objects in place when cutting through material stock.

For more help using MillMage, please visit our forum to talk with MillMage staff and users, or email support.